Filter
Top Products
PAGE 14
Operating Mint Cont’d
Place the NorthStar® Cube
Press the button on the back corner of
the NorthStar Navigation Cube to turn it
on. A blue light will flash on the opposite
corner when turned on, and then go solid
when Mint locks onto it.
If you forget to turn the Cube on, Mint will
send a signal to try to turn it on. If Mint is
successful, the blue flashing light will appear
on the Cube.
Note: You can set up additional Cubes (sold separately) to cover different areas in
your home. If two Cubes are in range, Mint will lock onto the one with the strongest
signal and clean that area. The other Cube will automatically shut off.
Place the NorthStar Navigation Cube on a
table or counter top, pointing the blue light
away from walls and toward the middle of
the room.
For Best Results
Place the NorthStar Navigation Cube where it has a clear view of the ceiling
(for example, no cabinet or shelf directly above it).
Do not move the NorthStar Navigation Cube once Mint has started cleaning
as it may impair Mint’s cleaning performance.
Do not put the NorthStar Navigation Cube on the oor as the cleaner may run
into it and move it.