Ionic Pro CA500 Air Cleaner User Manual


 
5
IMPORTANT WARNINGS
the unit, see Diagram B or F for the loca-
tion of the Wire Cleaning Mechanism. Lift
and lower the Wire Cleaning Mechanism
three to four times to thoroughly clean the
internal ionizing wires (see Diagram H in
the
“CLEANING & MAINTENANCE” section).
This movement helps to scrape free particles
from the internal ionizing wires. To keep
your Ionic Pro
®
ionic air purifier working
properly, it will be necessary to clean the
collection blades after every month of use
and the internal ionizing wires after every
two weeks of use (see “CLEANING & MAINTE-
NANCE” and “DEEP CLEANING” section of this
manual for the proper techniques).
WARNING: After cleaning the collection blades
(see “CLEANING AND MAINTENANCE” section) with
soap and water, allow at least 24 hours for the
collection blades to dry thoroughly before inserting them
back into the unit. Water can easily get trapped along the
collection blades’ many surfaces and edges and damage
could result if there is any moisture on the collection
blades. To allow for virtually uninterrupted air purification,
a second set of collection blades may be purchased (kept
clean and in its box when not in use) and inserted into the
Ionic Pro
®
ionic air purifier while the original collection
blades are drying.
You will need to clean your Ionic Pro
®
air purifier more
often if it has been exposed to heavy pollution.
Do not place Ionic Pro
®
ionic air purifier near a fireplace. Even if a fireplace is not in use, chimney dust and soot may
circulate through the Ionic Pro
®
ionic air purifier and then re-circulate and leave a residue on the unit and surrounding
areas. We recommend not placing the Ionic Pro
®
ionic air purifier anywhere near candles or oil lamps. If you intend to
use candles or oil lamps near the Ionic Pro
®
ionic air purifier despite this warning, make sure that the wicks are cut to
no more than a quarter inch to cut down on smoke production.
4
IMPORTANT WARNINGS
IMPORTANT WARNINGS
Main Parts
Before using your Ionic Pro
®
ionic air
purifier, please read the following
important information.
First, please look at the “Main Parts”
diagram and locate the part labeled A.
These are the collection blades and
are a vital part of this amazing ionic air
purifying system.
The collection blades are where
unhealthy pollutants, allergens, irritants
and odors are trapped when the Ionic
Pro
®
ionic air purifier is in proper
working condition and in use.
The Ionic Pro
®
ionic air purifier is
designed to run quietly and requires very
little time and effort to maintain in
proper working condition. If you hear
excessive noise or static coming from your
Ionic Pro
®
ionic air purifier, it generally
indicates that the product needs to be
cleaned. Turn off your Ionic Pro
®
ionic air
purifier, unplug the cord and carefully
follow the cleaning instructions in the
“CLEANING & MAINTENANCE” section of
this manual.
If the product is still making excessive
noise after cleaning and thoroughly drying
the collection blades and re-inserting
them as described in the
“CLEANING &
MAINTENANCE” section of this manual,
turn off and unplug the unit. After you
have turned off and unplugged
C.
E.
D.
A. COLLECTION BLADES
B. OPERATING PANEL
C. OUTER CASE HOUSING
D. AC CORD
E. BASE
F. WIRE CLEANING MECHANISM
G. REMOVABLE CAP
TOP OF COLLECTION BLADES.
See A for view of
collection blades alone.
G.
COLLECTION
BLADES’ HANDLE
REMOVABLE CAP
WIRE CLEANING
MECHANISM
F.
IP_CA500_Mnl_Rev_092707.qxp:Layout 1 6/3/08 2:56 PM Page 6