Filter
Top Products
18
ESPRESSO FINISH CLOSED CABINET TV STAND
www.insigniaproducts.com
Step 14
:
Attach miscellaneous hardware and labels
1 Push the rubber sleeves (DD) over one end of each metal pin (CC). Insert the metal end of the pins into the hole
locations of your choice in the ends (A and B) and uprights (C and D). Set the adjustable shelves (J and K) onto
the metal pins.
2 Apply the warning label (EE) to the top (E). You should be able to read the label when the TV is removed from
the unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in
the diagram.
Note: This is a permanent label intended to last for the life of the product. After it is applied, do not try to remove it.
Note: Please read the back pages of this instruction booklet for important safety information.
3 This completes the assembly. Clean your TV stand with your favorite furniture polish or a damp cloth, then wipe
dry.
EE
95 lbs.
A
C
D
B
E
J
J
K
K
CC
DD
25 lbs.
25 lbs.
20 lbs.
20 lbs.
60 lbs.
Never use this furniture with a TV that
is too large or too heavy. Severe injury
or death can occur. The TV and
furniture will be unstable and may tip.
- The TV must weigh less than 95 lbs.
- The base of the TV must be able to
sit completely on this shelf.
WARNING
You’ll need:
CC (16)
DD (16)
EE (1)
NS-WD1450_NS-WD1450-C_14-0647_MAN_V3_ENG.fm Page 18 Tuesday, June 24, 2014 12:19 PM