Filter
Top Products
13
HIGH-GLOSS BLACK METAL AND GLASS TV STAND
www.insigniaproducts.com
Step 9: Install the middle and bottom shelves.
Note: The curved edges of the glass shelves should face out.
1 Carefully insert the middle glass shelf (B) into the two glass clips and onto the glass spacers on the brace (G),
then tighten the plastic screws in the glass clips with a Phillips screwdriver.
2 Carefully place the bottom glass shelf (C) onto the glass spacers on the bottom frame (H).
You’ll need:
Curved edge
Curved edge
Tighten the
plastic screws
after you insert
the middle
shelf.
Phillips screwdriver
NS-MG1344 MAN_15-0060_MAN_V4_EN-SP.fm Page 13 Monday, February 9, 2015 10:28 AM