Filter
Top Products
Adjustment
knob
V3 ENGLISH 14-1430
USING YOUR FAN
Speed selection
The power switch is incorporated in the speed control switch on the
top of the fan.
0 - The fan is switched o.
1 - The fan operates at a low speed.
2 - The fan operates at a medium speed.
3 - The fan operates at a high speed.
Oscillation
To allow the fan to oscillate, push the knob down next to the fan speed
control. Pull up on the knob if you don’t want it to oscillate.
Angle adjustment
1 Loosen the adjustment knob.
2 Adjust the fan to the angle you want, then retighten the knob to
secure the fan at that angle.
REPLACING THE FUSE
Warning: Risk of re. Replace the fuse only with a 5A, 125 Volt fuse. Do
not force the fuse into place.
1 Unplug the fan.
2 Slide open the fuse access cover
on top of the AC power plug.
3 Remove the fuse.
4 Replace the fuse, then slide the fuse access cover closed.
Caution: Do not replace the AC power plug. Discard the product if the
plug is damaged.
CLEANING YOUR FAN
• Unplug the fan.
• Clean plastic parts with mild soap and a damp cloth or sponge.
Thoroughly remove soap lm with clear water.
• Do not splash water or other liquid into the motor.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
W7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China