Filter
Top Products
9
48” BLACK TV STAND
www.insigniaproducts.com
Step 5: Attaching the center and bottom shelves
1 Slide the center shelf (H) into the three center shelf supports. Make sure that the center shelf fits evenly in the
center shelf supports.
2 Tighten the six clamp screws to secure the center shelf to the center shelf supports. The clamp screws are
preinstalled on the shelf brackets.
3 Attach two suction cups (U) to the front base, then slide the bottom shelf over the suction cups and into the
stand. Make sure that you slide the bottom shelf all the way to the back of the stand. The bottom shelf should
rest on to of the two bottom shelf supports that are attached to the back support.
You’ll need:
U (2)
Phillips screwdriver
NS-C1140FMS_14-0258_MAN_V1_ENG.fm Page 9 Thursday, May 1, 2014 8:38 AM