Filter
Top Products
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
y
FAX (800) 892-6276
© 2010 CCN 15339062
www.ingersollrandproducts.com
OPERATOR’S MANUAL TP1044S5XXXXXXXX
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE.
INCLUDE MANUALS: AF1044SXXXXXX-XX-X Extrusion Pump (pn 97999-1522), 66516-X Follower Assembly
(pn 97999-854), 67195-X Follower Assembly (pn 97999-841), RM552S-XX Heavy Duty Two Post Lift / Ram (pn
97999-1445), & S-636 General Information (pn 97999-636).
RELEASED: 5-12-10
(REV. 01)
EXTRUSION PUMPING SYSTEM
For use with 55 gallon drums
10” AIR MOTOR
44:1 RATIO
6” STROKE
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
The original language of this manual is English.
SERVICE KITS
104468 for repair of lter section of P39124 -100 lter / regulator.
104302
for repair of regulator section of P39124-100 lter / regulator.
104326 for repair of lter section of P39344 -100 lter/regulator..
637489 for repair of air motor section.
637466 for repair of lift / ram seals.
637348-XXD for repair of lower pump end section.
MODEL DESCRIPTION CHART
TP10445SXXXXXXXX EXTRUSION SYSTEM
Figure 1
GENERAL DESCRIPTION
By delivering a smooth, continuous bead of the proper size, an
ARO® system helps the operator maintain both production rate
and produce high quality standards. Maintained quality standards
assures that the material bene ts are realized. To further maximize
operator production time, the ARO system has a built-in lift / ram
feature for quick and easy drum changeover and easy lifting of the
pump assembly from the container.
ARO systems are totally enclosed, sealing the material in the sys-
tem from air and moisture, preventing premature cure-out of the
material. This allows for either continuous or intermittent use of the
system and allows the need for daily system clean-up.
TP 10 44 S 5 XXXXX XX X
Air Motor Size
10 - 10”
Pump Ratio
44 - 44 : 1
Container Suitability
55 Gallon (400 lbs)
Check Type / Wetted Materials
S - Primer Piston, Carbon Steel Nickel-Plated
Pump Options
Refer to pump Operator’s Manual
Package Options
0 – None - Basic control for Ram only
2 - Advanced Pump and Ram controls
Packing Type
TP - Two Post
Follower Assembly
AC - 66517 TB - 66517-7 TN - 67196-6
AA - 66517-1 AM - 67196-1 TV - 67196-7
AB - 66517-2 AN - 67196-2 AS - 67196-8
TC - 66517-5 AV - 67196-3 TS - 67196-9
TA - 66157-6 TM - 67196-5