Filter
Top Products
Page 5 of 8PW10A-X-X
PARTS LIST / PW10A-X-X FLUID SECTION
COLOR CODE
15
FOR THE
AIR MOTOR SECTION
SEE PAGES 6 & 7
Santoprene 8
PTFE 7
131 ,
x
175 k
Figure 2
View of two piece PTFE diaphragm
29 ,
144 k
70 k
. TORQUE REQUIREMENTS ,
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
(14) screw, tighten to 25 - 30 ft lbs (33.9 - 40.7 Nm).
(26) screws, 20 - 25 ft lbs (27.1 - 33.9 Nm).
(29) nuts, 15 - 20 ft lbs (20.3 - 27.1 Nm).
(131) screws, 12 - 17 ft lbs (16.3 - 23.0 Nm).
LUBRICATION / SEALANTS
k Apply Lubriplate FML-2 Grease to all “O” rings, “U”
Cups & mating parts.
x Apply LoctiteR 242 to threads at assembly.
- Apply PTFE tape to threads at assembly.
~ Apply Loctite 271 to threads at assembly.
U Apply anti-seize compound to threads at assembly.
Y Not used with PW10A-AAX-AXX, -CXX and -GXX.
Z Lubriplate FML-2is a white foodgrade petroleum grease.
DIAPHRAGM BALL
MATERIAL COLOR COLOR
HYTREL Cream Cream
NITRILE Black Red (S)
SANTOPRENE Tan Tan
SANTOPRENE Green N / A
(Backup)
PTFE White White
VITON Yellow (-) Yellow (S)
(-)Dash (S)Dot
8
1
2
7
Torque Sequence
22
21
19 Y
26 , U
61
22
19 Y
21
144 k
70 k 69
1 k 5
7
6
10
6
4
9
5
3
9195
14 , ~
180 k27 U
68
60
27 U
43
33 Y
33 Y
29 ,
26 , U
175 k