Filter
Top Products
Page 5 of 8PM15X-X-X-A02
PARTS LIST / PM15X-X-X-A02 FLUID SECTION
COLOR CODE
15
FOR THE
AIR MOTOR SECTION
SEE PAGES 6 & 7
Santoprene 8
PTFE 7
131 ,
x
175 k
Figure 2
View of two piece PTFE diaphragm
29 , U
144 k
70 k
. TORQUE REQUIREMENTS ,
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
(14) screw, tighten to 50 - 55 ft lbs (67.8 - 74.6 Nm).
(26) screws, 20 - 25 ft lbs (27.1 - 33.9 Nm).
(29) nuts, 15 - 20 ft lbs (20.3 - 27.1 Nm).
(131) screws, 12 - 17 ft lbs (16.3 - 23.0 Nm).
LUBRICATION / SEALANTS
k Apply Lubriplate FML-2 grease to all “O” rings, “U” Cups
& mating parts.
x Apply LoctiteR 242 to threads at assembly.
- Apply PTFE tape to threads at assembly.
~ Apply Loctite 271 to threads at assembly.
U Apply anti-seize compound to threads and bolt and nut
flange heads which contact pump case when using
stainless steel fasteners.
Y Not used with PM15X-CSS-AXX-A02.
Z Lubriplate FML-2 is a white food grade petroleum grease.
DIAPHRAGM BALL
MATERIAL COLOR COLOR
Santoprene Tan Tan
Santoprene Green N/ A
(Backup)
PTFE White White
(-)Dash (S)Dot
8
1
2
7
Torque Sequence
22
21
19 Y
26 , U
61
22
19 Y
21
144 k
70 k 69
1 k
5
7
6
10
6
4
9
5
3
9195
14 , ~
180 k
27 U
68
175 k
60
26 , U
k 180
28
AUXILIARY VIEW A-A
(models PM15R-CSS-XXX-A02)
A
A
B
B
180 k
AUXILIARY VIEW B-B
(models PM15R-CSS-XXX-A02)
195