Ingersoll-Rand PE15X-XXX-XXX Water Pump User Manual


 
Page 7 of 8PD15X-XXX-XXX (en)
PARTS LIST / PX15X-XXX-XXX AIR SECTION
168 k
. TORQUE REQUIREMENTS ,
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
PX15A-XXX-XXX and PX15S-XXX-XXX: Torque (105 and 134)screws to 40 - 50
in. lbs (4.5 - 5.6 Nm).
PX15R
-XXX-XXX: Torque (134) screw to 30 - 40 in. lbs (3.4 - 4.5 Nm) and (236)
nut to 35 - 40 in. lbs (4.0 - 4.5 Nm).
LUBRICATION / SEALANTS
k Apply Lubriplate FML -2 grease to “O” rings, “U” Cups & mating parts.
- Apply PTFE tape to threads at assembly.
U Apply anti-seize compound to threads at assembly.
U . 134
135
133
174 k
121
118
173 k
169 k
172 k
171 k
170
167
121
k 174
118
166 k
132 k
141 k
140
200 k
233
176 k
PILOT VALVE
PART GROUP
MAJOR
VALVE
A replacement Major Valve Service Assemblyis available separately, which includes the following:
637390-1 for models PD
15R-XXX-XXX: 105 (4), 107 (2), 111, 132, 135, 136, 137, 138, 139, 140,
141, 166, 176 (2), 200, 233 and 236 (4).
637390-2formodelsPE
15R-XXX-XXX:76,105(4),107(2),111,132,135,136, 137,138, 139,140,
141, 166, 176 (2), 200, 233 and 236 (4).
637390-3 for models PD
15A-XXX-XXX: 105(4), 111,128, 132,135, 136, 137,138, 139,140, 141,
166, 176 (2), 200 and 233.
637390-4 for models PE
15A-XXX-XXX: 76, 105 (4), 111, 128, 132, 135, 136, 137, 138, 139, 140,
141, 166, 176 (2), 200 and 233.
637390-5 for models PD
15S-XXX-XXX: 105(4), 111,128, 132,135, 136, 137,138, 139,140, 141,
166, 176 (2), 200 and 233.
637390-6 for models PE
15S-XXX-XXX: 76, 105 (4), 111, 128, 132, 135, 136, 137, 138, 139, 140,
141, 166, 176 (2), 200 and 233.
Figure 3
101
181 103 201
173 k
136
- 128
U . 105
U . 134
135
133
136
107
U 105
107
. 236
Models PX15A-XXX-XXX
PX15S-XXX-XXX
Models PX15R-XXX-XXX
MATERIAL CODE
[A] = Aluminum
[AO] = Alumina Oxide
[B] = Nitrile
[Br] = Brass
[C] = Carbon Steel
[D] = Acetal
[P] = Polypropylene
[SP] = Santoprene
[SS] = Stainless Steel
[U] = Polyurethane
[Z] = Zinc
k 137
k 139
k 138
111
k 137
k 139
111
k 138
Insert screwdriver here to remove (233) adapter plate.
Insert screwdriver here to remove (233) adapter plate.
Notch