Filter
Top Products
Page 5 of 8PD10X-X-X
PARTS LIST / PX10X-X-X FLUID SECTION
COLOR CODE
15
FOR THE
AIR MOTOR SECTION
SEE PAGES 6 & 7
Santoprene 8
PTFE 7
131 ,
x
175 k
Figure 2
View of two piece PTFE diaphragm
29 ,
144 k
70 k
. TORQUE REQUIREMENTS ,
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
(14) screw, tighten to 25 - 30 ft lbs (33.9 - 40.7 Nm).
(26) screws, 20 - 25 ft lbs (27.1 - 33.9 Nm).
(29) nuts, 15 - 20 ft lbs (20.3 - 27.1 Nm).
(131) screws, 12 - 17 ft lbs (16.3 - 23.0 Nm).
LUBRICATION / SEALANTS
k Apply Lubriplate FML-2 grease to all “O” rings, “U” Cups &
mating parts.
x Apply Loctite
R
242 to threads at assembly.
- Apply PTFE tape to threads at assembly.
~ Apply Loctite 271 to threads at assembly.
U Apply anti-seize compound to threads and bolt and nut flange
heads whichcontact pump casewhen using stainless steel
fasteners.
s Not used with PX10X-XXX-A
XX, -CXX and -GXX.
Z Lubriplate FML-2 is a white food grade petroleum grease.
DIAPHRAGM BALL
MATERIAL COLOR COLOR
Hytrel Cream Cream
Nitrile Black Red (S)
Santoprene Tan Tan
Santoprene Green N / A
(Backup)
PTFE White White
Viton Yellow (-) Yellow (S)
(-) Dash (S)Dot
8
1
2
7
Torque Sequence
22
21
19 s
26 , U
61
22
19 s
21
144 k
70 k 69
1 k 5
7
6
10
6
4
9
5
3
9195
14 , ~
180 k27 U
68
60
63 - k
27 U
76 -
43
74 -
k 180
28
AUXILIARY VIEW A-A
(models PX10R-XXX -XXX)
A
A
AUXILIARY VIEW B-B
(models PX10R-XXX -XXX)
180 k
195
33 s
33 s
29 ,
26 , U
63 - k
175 k
B
B
MATERIAL CODE
[A] =Aluminum [K] =PVDF (KynarR)
[B] =Nitrile [MSP]=Medical Grade Santoprene
[C] = Carbon Steel [P] =Polypropylene
[CI] = Cast Iron [SH] = Hard Stainless Steel
[Co] = Copper [SP] = Santoprene
[E] =E.P.R. [SS] = Stainless Steel
[H] = Hytrel [T] = PTFE
[Ha] = Hastelloy-C [V] = Viton