Filter
Top Products
PD10E-X-X (en) Page 5 of 8 Page 5 of 8
TORQUE REQUIREMENTS
LUBRICATION / SEALANTS
Lubriplate FML-2 is a white food grade petroleum grease.
cups & mating parts.
Apply Loctite 242 to threads at assembly.
Apply Lubriplate FML-2 grease to all “O" rings, ”U"
Apply anti-seize compound to threads and bolt and
nut ange heads which contact pump case when
using stainless steel fasteners.
(6) Diaphragm washer, 25 - 30 ft lbs (33.9 - 40.7 Nm), lubri-
cate face with Lubriplate grease and apply Loctite
271 to threads.
(26) Screws, 10 - 12 ft lbs (13.6 - 16.3 Nm).
(29) Nuts, 10 - 12 ft lbs (13.6 - 16.3 Nm).
(131) Screws, tighten to 11 - 14 ft lbs (14.9 - 19.0 Nm).
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
Santoprene 8
7 Teon
VIEW OF TWO PIECE TEFLON DIAPHRAGM
180
28
AUXILIARY VIEW A-A
8
1
2
7
Torque Sequence
10
6
4
9
5
3
COLOR CODE
DIAPHRAGM BALL
MATERIAL COLOR COLOR
Hytrel Cream Cream
Nitrile Black Red ( )
Santoprene Tan Tan
Santoprene Green N / A
(Backup)
T.F.E. (Teon) White White
Viton Yellow (-) Yellow (
)
(-) Dash ( ) Dot
15
FOR THE
AIR MOTOR SECTION
SEE PAGES 6 & 7
131
175
Figure 2
29
144
70
22
21
19
26
22
19
21
144
70 69
180 5
7
6
27
68
175
60
26
33
33
195
A
A
61
1
PARTS LIST / PD10E-X-X FLUID SECTION