Filter
Top Products
Page 2 of 12 PX01X-XXX-XXX-AXXX (en)
MODEL DESCRIPTION CHART
Model Code Explanation
Example: PX01 X
-
XXX
-
XXX
-
AX
XX
Model Series
PD01- Standard Pump
PE01- Electronic Interface
Center Body Material
P - Polypropylene
F- Polypropylene with Leak Failure Detection
E- Groundable Polypropylene
Connection
H- Hybrid 1/4” NPT / BSP
Fluid Caps / Manifold Material
D- Groundable Acetal
K- Kynar PVDF
P- Polypropylene
Hardware Material
S- Stainless Steel
Seat / Spacer Material
D- Acetal
K- Kynar PVDF
P- Polypropylene
0- Polypropylene (Flex Check Spacer)
1- Acetal (Flex Check Spacer)
2- PVDF (Flex Check Spacer)
Check Material
A- Santropene
C- Hytrel
G- Nitrile
T- PTFE
J- Nitrile (ex check only)
K- EPR (ex check only)
N- Neoprene (ex check only)
L- Viton (ex check only)
Diaphragm / O-Ring Material
A- Santoprene
C- Hytrel
G- Nitrile
T- PTFE
Revision
A- Revision
Specialty Code 1 (Blank if no Speciality Code)
B- Solenoid 12VDC, 24VAC and 22VAC
D- Solenoid 24VDC, 48VAC and 44VAC
A- Solenoid 120VAC,110VAC AND 60VDC
C- Solenoid 240VAC, 220VAC AND 120VDC
G- Solenoid 12VDC ATEX Zone 1
H-
Solenoid 24VDC ATEX Zone 1
K- Solenoid 220VAC ATEX Zone 1
N- Solenoid with no Coil
0-
Standard Valve Block ( No Solenoid)
Specialty Code 2 (Blank if no Speciality Code)
NOTICE: All possible options are shown in the chart, however, certain combinations may not be recommended.
Consult a representative or the factory if you have questions concerning availability.
L- Leak Detection
F- End of stroke feedback / cycle sensing ( with M12 Circular Connector)
N- End of stroke feedback / cycle sensing (no Connector) + Leak Detection
E- End of stroke feedback / cycle sensing (with M12 Circular Connector) + Leak Detection
P- End of stroke feedback (No Connector)
0- No option
Special Testing
For Special Testing options, please contact your nearest Ingersoll Rand Customer Service Representative or Distributor.