Filter
Top Products
1
5
Rekey Cylinder as Usual
BE365 Cylinder Removal Instructions
2
NOTE: Tailpiece is available in the Schlage Supplemental
Electronics Lock Rekeying Kit
9
Use BE365 Installation Sheet to Install Lock.
Reinstall Cylinder as Shown
NOTE: Make sure top of cylinder is pointing toward keypad.
Top of Cylinder
Keypad
Remove Backplate from Outside Keypad Assembly
Remove Cylinder from Thumbturn
8
3
Remove Retainer, Block and Disc from Cylinder
7
Install Disc, Block and Retainer
6
Install Spring, Pin, Tailpiece, and Cylinder Cap
4
Remove Cylinder Cap, Tailpiece, Pin, and Spring
© 2006 Ingersoll Rand Company Limited MR-1602