Ingersoll-Rand 67317-X Heat Pump User Manual


  Open as PDF
of 4
 
CCN 15211485
TWO-BALL STYLE LOWER PUMP ENDS
STAINLESS STEEL
OPERATOR’S MANUAL
67317-X
RELEASED: 3-6-03
REVISED:
(REV.
J)
INCLUDING: SERVICE KIT, TROUBLESHOOTING, PARTS LIST, DISASSEMBLY & REASSEMBLY
ALSO COVERS 637379-X SERVICE KITS
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
67318-X
SERVICE KITS
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 637379-X31 for general repair of 6731X-X31 lower pump ends.
GENERAL DESCRIPTION
WARNING
DO NOT EXCEED MAXIMUM OPERATING PRES-
SURE AS INDICATED ON PUMP MODEL PLATE.
WARNING
REFER TO GENERAL INFORMATION SHEET
FOR ADDITIONAL SAFETY PRECAUTIONS AND IMPORTANT
INFORMATION.
• This manual only covers the lower pump section. It is one of four
documents which support an ARO pump. Replacement copies of
these forms are available upon request.
- NM2202B-X-X Pump Model Operator’s Manual.
- General Information for Air Operated or Hydraulically Operated
Pumps.
= Lower Pump End Operator’s Manual.
- Air or Hydraulic Motor Operator’s Manual.
• Thetwo-ball designprovides foreasy primingofthe lowerfoot valve.
The double acting feature is standard in all ARO industrial pumps,
material isdelivered tothe pump dischargeoutlet onboththe upand
down stroke.
MAINTENANCE
The air / hydraulic motor is completely separate from the lower pump
end. This helpsto keep the motor frombeing contaminated by the mate-
rial being pumped. Periodically, flush entire pump system with a lubri-
cant that is compatible with the material being pumped.
Provide a clean work surface to protect sensitive internal moving parts
from contamination from dirtandforeign matter during disassembly and
reassembly.
Before reassembling, lubricate parts asrequired. When assembling “O”
rings, or parts adjacent to “O” rings, exercise care to prevent damage to
“O” rings and “O” ring groove surface.
Figure 1
LOWER PUMP END DESCRIPTION CHART
6731 X -X 3 1
Plunger Type
1 - Standard (300 series stainless steel)
Packing Material
7 - PTFE (upper and lower)
B - UHMW-PE (upper) / PTFE (lower)
C - UHMW-PE (upper and lower)
J - Polyurethane (upper) / UHMW-PE (lower)
Spring Arrangement
3-NoSpring
6731X - X 31
Packing
SERVICE KIT SELECTION
EXAMPLE: Lower Pump End # 67317-C31
Service Kit # 637379-C31
637379 - X 31
Container Suitability
7 - 55 Gallon
8 - Universal (stub)
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com
8-1 -11
next