Filter
Top Products
CCN 99449712
OPERATOR’S MANUAL
66605X-X
RELEASED: 4-15-87
REVISED: 5-28-10
(REV. AR)
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
1/2” DIAPHRAGM PUMP
1:1 RATIO (NON-METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to Model Description Chart to match the pump material options.
637140-XX for fluid section repair (see page 4).
637141 for air section repair (see page 6).
PUMP DATA
Models see Model Description Chart for “-XXX”...........
Pump Type Non-Metallic AirOperated DoubleDiaphragm.......
Material see Model Description Chart...........
Weight Polypropylene 7.2 (3.3 kgs).... .........
Groundable Acetal 8.8 (4.0 kgs)......
KynarR PVDF 9.5 (4.3 kgs).........
Maximum Air Inlet Pressure 100 p.s.i.g. (6.9 bar).........
Maximum Material Inlet Pressure 10 p.s.i.g. (0.69 bar).....
Maximum Outlet Pressure 100 p.s.i.g. (6.9 bar)..........
Air Consumption 1 c.f.m. / gallon (approx.).................
Maximum Flow Rate (Ball) 13 g.p.m. (49.2 l.p.m.).......
(Duckbill) 10 g.p.m. (37.9 l.p.m.)....
Maximum Particle Size (Ball) 3/32” dia. (2.4 mm).......
(Duckbill) Fibers....
Maximum Temperature Limits
E.P.R. -60_ to 280_ F(-51_ to 138_ C)................
Groundable Acetal 10_ to 180_ F(-12_ to 82_ C).......
HytrelR -20_ to 150_ F(-29_ to 66_ C)..............
Neoprene 0_ to 200_ F(-18_ to 93_ C).............
Nitrile 10_ to 180_ F(-12_ to 82_ C)................
Polypropylene 35_ to 175_ F(2_ to 79_
C)..........
Polyurethane 10_ to 150_ F(-12_ to 66_ C)...........
Kynar PVDF 10_ to 200_ F(-12_ to 93_ C)...........
SantopreneR -40_ to 225_ F(-40_ to 107_ C)..........
PTFE 40_ to 225_ F(4_ to 107_ C)................
VitonR -40_ to 350_ F(-40_ to 177_ C)...............
Groundable 666056-X and 66605H-X models only...........
Dimensional Data see page 8................
Noise Level @ 70 p.s.i., 60 c.p.m. 71.1 db(A).....
* Thepump sound pressurelevels published herehavebeenupdatedtoanEquivalent
ContinuousSoundLevel (L
Aeq
)tomeet theintentofANSI S1.13-1971,CAGI-PNEU-
ROP S5.1using four microphone locations.
NOTICE:Allpossibleoptionsareshowninthecharthowevercertaincom-
binations may not be recommended, consult a representative or the fac-
tory if you have questions concerning availability.
666053-XXX
666056-XXX
666057-XXX
66605J-XXX
66605H-XXX
66605K-XXX
Figure 1
MODEL DESCRIPTION CHART
66605 X -X X X - 04
66605X - X X X
637140 - X X
DiaphragmBall
FLUID SECTION SERVICE KIT SELECTION
EXAMPLE:MODEL #666053-321
Fluid Section Service Kit # 637140-21
Seat Material
0 - (Duck Bill) 4 - Kynar PVDF
2 - Stainless Steel 6 - Acetal
3 - Polypropylene
Ball Material
(* )Duckbill models
1 - Neoprene 8 - Polyurethane
2 - Nitrile A - Stainless Steel
3 - Viton C - Neoprene (*)
4 - PTFE D - Nitrile (*)
5 - E.P.R. E - Santoprene
Diaphragm Material
1 - Neoprene 5 - E.P.R.
2 - Nitrile 8 - Polyurethane
3-Viton 9-Hytrel
4 - PTFE / Santoprene B - Santoprene
Fluid Caps & Manifold Material
3-PieceManifold SinglePieceManifold
3 - Polypropylene J - Polypropylene
6 - Groundable Acetal H - Groundable Acetal
7 - Pure Kynar K - Pure Kynar
Cone Check Flow
04 - Top Discharge
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com