Ingersoll-Rand 650929- -X Heat Pump User Manual


  Open as PDF
of 2
 
OPERATOR’S MANUAL 650929 -- X
R EL EA SE D: 8 -- 3 0 -- 9 6
REVISED: 6--4--10
(REV.
02)
TWO--BALL PUMP SERIES
2.062 SQ.” HYDRAULIC MOTOR
1.7:1 RATIO
6” STROKE
INCLUDE MANUALS:6689X--X LOWER PUMPEND (PN 97999--082) &
FORM 3638--2 GENERAL INFORMATION MANUAL(PN 97999--353)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, T ROUBLESHOOTING
650929--X
CARBON STEEL
SERVICE KITS
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 637164 for repair of Hydraulic Motor section.
Service Note: The Hydraulic Motor Service/Parts Manual is not
shippedwith thepump butitis includedwith eachServiceKit. Ifthis
Service/Parts Information is needed, request the Hydraulic Motor
Operator’s Manual from ARO. (Manual 61588--100,
PN 97999--063).
• 637180- X43 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --XXX options.
SPECIFICATIONS
Model Series (Referto option chart) 650929--X43..
Type Hydraulically Operated, Two--Ball....................
Ratio 1.7:1....................
Hydraulic Motor 61588--100............
Motor Repair Kit 637164..........
Motor Size 2.062 sq.’’ (13.3 sq. cm)..............
Stroke 6’’..................
Hydraulic Inlet 3/8’’ -- 18 NPTF--1(f)...........
Hydraulic Return 1/2” -- 14 NPTF--1(f).........
Lower Pump End Series 66890--X43.....
Lower Pump Repair Kit 637180--X43.....
Material Inlet 2’’ 11--1/2 PTF(m).............
Material Outlet 1’’ 11--1/2 NPTF--1(f)...........
PERFORMANCE
Hydraulic Inlet Pressure Range 50 -- 1200 PSI (3.4 -- 83 bar)
Fluid Pressure Range 85 -- 2054 PSI (5.9 -- 142 bar).......
Max. Rec’d Cycles / Minute 50...
Displacement In
3
Per Cycle 14.531...
Volume / Cycle 8.1 oz. (238 ml).............
Cycles Per Gallon 15.9..........
Flow @ 50 Cycles / Minute 3.1 GPM (11.9 lpm)....
Noise Level N/A...............
PUMP DATA
Hydraulic Motor
61588--100
(SeeManual61588--100)
FIGURE 1
Material Outlet
1’’ NPTF--1(f)
90_FROMHYDRAULICINLET
Lower Pump
66890--X43
(SeeManual6689X--X)
Hydraulic Inlet
3/8--18 NPTF--1(f)
(NotShown)
Spacer Section
43-1/2
(1105mm)
12-29/32
(328mm)
28-7/32
(717mm)
Accessory Available:61937--1 WallBracket and65138 FloorMounting Flange.
CONNECTOR(See Figure2)
MODEL 650929-X43
CAPSCREW 93342--1 (3)
WASHERY14--625--C ( 3)
SPACERROD 93345--1 (3)
Material Inlet
2’’ 11--1/2 PTF
SHORTMALE
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
= 650929--X MODEL OPERATOR’S MANUAL
- GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
- 6689X--X LOWER PUMP END OPERATOR’S MANUAL
- 61588--100 HYDRAULIC MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com
CCN 81378937