Ingersoll-Rand 650925-X43-B Heat Pump User Manual


  Open as PDF
of 2
 
OPERATOR’S MANUAL 650925 -- X--B
RELEASED: 8--1--97
REVISED: 6--4--10
(REV. B)
FOUR BALL PUMP SERIES
2.062 SQ.” HYDRAULIC MOTOR
0.3:1 RATIO
6” STROKE
INCLUDE MANUALS:6695X--X LOWERPUMP END(PN 97999--002), 67147HYDRAULIC MOTOR (PN 97999--705) &
FORM 3638--2 GENERAL INFORMATION MANUAL (PN 97999--353)
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, T ROUBLESHOOTING
650925--X--B
400 SERIES STAINLESS STEEL
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 637315 for repair of Hydraulic Motor section.
• 637230-X43 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --XXX options.
SPECIFICATIONS
Model Series (Refertooption chart) 650925--X43--B..
Type Hydraulically Operated, Four Ball....................
Ratio 0.3:1....................
Hydraulic Motor 67147............
Motor Repair Kit 637315..........
Motor Size 2.062 sq.’’ (13.3 sq. cm)..............
Stroke 6’’..................
Hydraulic Inlet 3/8’’ -- 18 NPTF--1(f)...........
Hydraulic Return 1/2” -- 14 NPTF--1(f).........
Lower Pump End Series 66951--X43.....
Lower Pump Repair Kit 637230--X43.....
Material Inlet N/A.............
Material Outlet 3/4’’ NPTF--1 (f)...........
PERFORMANCE
Hydraulic Inlet Pressure Range 50 -- 1200 psi (3.4 -- 83 bar)
Fluid Pressure Range 15 -- 360 psi (1 -- 25 bar).......
Required H-power @ 50 cpm 3.2 @ 1200 (83 bar).
Hydraulic flow req’d @ 50 cpm 8.7 gpm (32.9 lpm)
Max. Rec’d Cycles / Minute 50...
Displacement In
3
Per Cycle 82.172...
Volume / Cycle 45.5 oz. (1346 ml).............
Cycles Per Gallon 2.8..........
Flow @ 50 Cycles / Minute 17.8 gpm (67 lpm)....
Noise Level N/A...............
Maximum Temperature Limit 130_ F(54_ C)..
PUMP DATA
Hydraulic Motor
67147
(SeeManual67147)
FIGURE 1
Material Outlet
3/4’’ NPTF--1(f)
191_FROMHYDRAULICINLET
Lower Pump
66951--X43
(SeeManual6695X--X)
Hydraulic Outlet
1/2--14 NPTF--2(f)
Spacer Section
41-1/4”
(1048 mm)
26-7/8
(683 mm)
14-21/32
(372 mm)
Accessory Available: 93351-- 1 Wall Bracket and66547 Floor Mounting Flange.
SPACER ROD 93580--1
CONNECTOR(See Figure 2)
MODEL 650925-X43-B
SCREW 93342--1 (3)
WASHERY14--625--C(3)
SPACER ROD 93580--2 (2)
Hydraulic Inlet
3/8--18 NPTF--1(f)
(NotShown)
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
= 650925--X--B MODEL OPERATOR’S MANUAL
- GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
- 6695X--X LOWER PUMP END OPERATOR’S MANUAL
- 67147 HYDRAULIC MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com