Filter
Top Products
R-7 1/07 © 2007 Imperial Commercial Cooking Equipment All specifications subject to change without notice. Printed in the U.S.A.
AIA File #:
Specification #:
Imperial Range Match Radiant Char-broilers
Total Total Ship Wt.
Model# Description BTU (KW) (Kg.) Lbs.
IR-24BR-120 24" (610) Char-broiler, 1 20" (508) Standard Oven 87,000 (26) (238) 525
IR-24BR-XB 24" (610) Char-broiler, 1 Cabinet Base 60,000 (18) (154) 340
IR-36BR-126 36" (914) Char-broiler, 1 26
1
/2" (673) Standard Oven 125,000 (37) (290) 641
IR-36BR-C 36" (914) Char-broiler, 1 26
1
/2" (673) Convection Oven 120,000 (35) (313) 692
IR-36BR-XB 36" (914) Char-broiler, 1 Cabinet Base 90,000 (26) (204) 450
IR-48BR 48" (1219) Char-broiler, 2 20" (508) Standard Ovens 174,000 (51) (376) 830
IR-48BR-XB-126 48" (1219) Char-broiler, 1 Cabinet Base, 1 26
1
/2" (673) Standard Oven 155,000 (45) (362) 799
IR-48BR-C-XB 48" (1219) Char-broiler, 1 26
1
/2" (673) Convection Oven, 1 Cabinet Base, 150,000 (44) (385) 850
IR-48BR-XB 48" (1219) Char-broiler, 1 Cabinet Base 120,000 (35) (250) 550
Range Dimensions: 36" (914) w x 37
1
/2"(953) d x 36" (914) height to cooking surface on XB models. 38
1
/2"(978) on units with ovens.
Crated Dimensions: Add 2" (51) to width of unit x 39" (991) d x 35" (889) h. All measurements in ( ) are metric equivalents.
Imperial Commercial Cooking Equipment
1128 Sherborn Street ■ Corona, CA 92879 ■ 800.343.7790 ■ Ph: 951.281.1830 ■ Fx: 951.281.1879
www.imperialrange.com ■ E-mail: imperialsales@imperialrange.com
Standard Exterior Specifications
Front, sides, landing ledge, control panel, backguard with
shelf and kick plate shall be constructed of stainless steel with
welded and finished stainless steel seams. Control knobs
shall be constructed of durable cast metal, polished chrome
finish. Chrome plated 6" (152) legs shall have adjustable feet.
Char-broiler Specifications
Burners shall be stainless steel, individually controlled 15,000 BTU/hr.
(26 KW) located every 6" (152). Removable, reinforced cast iron
radiants shall prevent clogging of burners and provide uniform
distribution of heat. Burner grates shall be constructed of heavy duty
reversible cast iron and made in 3" x 21" (76 x 533) sections. They
shall be pitched forward with a cast-in grease trough in each blade for
fat run off. Large, full width grease gutter shall have a large capacity
and be removable. Broiler body shall be fully insulated with a
replaceable inner liner. No tools shall be required to remove top
grates, radiant covers and stainless steel burners.
Standard Oven Specifications
Oven shall be 12 gauge construction with a welded front frame. Oven
shall be fully insulated with non-sag fiberglass. Oven interior shall
have porcelainized sides, rear, deck and door lining. Oven burner
shall provide 35,000 BTU/hr. (10 KW). Unique baffle above the
burner shall distribute heat flow to provide even cooking temperatures
throughout the oven. Oven shall have a 100% safety pilot. One
heavy duty locking chrome plated rack shall be included. Thermostat
shall be adjustable from 150
o
Fto500
o
F (65
o
C to 260
o
C) Oven
interior dimensions shall be 26
1
/2" w x 26" d x 14" h (673 x 660 x 356)
except IR-24BR-120 and IR-48BR models have 20" (508) wide oven.
Convection Oven Specifications
Shall have same exterior as standard oven.
1
/4 HP, 1725 RPM blower
motor (120VAC-60 HZ - 1Ph) with 5 amp draw. a 3-prong 6'
(1829mm) power cord shall be provided. Output shall be 30,000
BTU/hr. (9 KW) with “U” burner and electronic ignition. Unit shall
include three heavy duty chrome plated racks supported by chrome
plated guides. Unit shall include three-position switch for cooking or
cool down, a burner “on” indicator light and one hour manual timer.
Thermostat shall be adjustable from 150
o
Fto500
o
F. Oven interior
dimensions shall be 26
1
/2" w x 22
1
/2" d x 14" h (673 x 572 x 356).
Gas: Manifold pressure is 5.0" W.C. for natural gas or 10.0" for
propane gas. Manifold size
3
/4" (19) NPT.
3
/4" (19) pressure regulator
supplied with equipment to be installed at time of connection. Specify
type of gas and elevation if over 2000 ft. (610 m).
Clearance: For use only on non-combustible floors. Legs or casters
are required for non-combustible floors; or 2" (51) overhang is
required when curb mounted. Provide 0" clearance from
non-combustible surfaces and 8" (203) from combustible surfaces.
Optional Items:
■ Extra chrome rack
■ 220V motor and transformer
■ Extra oven racks
■ Gas shut off valve
3
/4" (19)
■ Quick disconnect and flexible gas hose
■ 6" (152) casters