Cornelius Door Latch Door User Manual


  Open as PDF
of 6
 
Door Latch Assembly Installation Instructions
Publication Number: 729011146INS - 2 - © 2004, IMI Cornelius Inc.
INSTALLATION
IMPORTANT: Disconnect power from machine before starting this procedure!
1.
Remove the top cover of the machine.
A. Remove two screws from rear of top. B. To remove cover open door and pull cover
forward.
FIGURE 2
FIGURE 3
2. Remove the side panel of the machine.
A. Remove latch cover plate.
NOTE: When reassembling latch guard use
the #8 PLASTIC screws supplied.
B. Remove 2 screws holding splash guard.
FIGURE 4
FIGURE 5
C. Remove one screw from lower rear on right
side panel.
D. Slide panel forward to remove.
NOTE: Do not loose plastic spacers located
on panel clips.
FIGURE 6
FIGURE 7
 previous next