Filter
Top Products
IINNTTEERRCCHHAANNGGEEAABBLLEE HHAANNDDLLEESS
Only the Super-8 and 8R feature interchangeable handles and both the lantern grip and pistol
grip handles are supplied. To change the handle, access the screw underneath the locking lever by
first sliding the locking lever out and then flip the lever up.
Remove the screw and washer and then slide the handle out of the body. Slide the other handle
into the groove and secure with the screw and washer.
NNOOTTEE::
Ikelite's black vinyl lanyard is NOT recommended for use with RCD Super-8/8R. The vinyl
lanyard is designed to be broken in an emergency and the weight of the Super-8/8R may cause the
lanyard to break during normal use.
RREEPPLLAACCEEMMEENNTT PPAARRTTSS
AA--EE 99001122..22
Head assembly complete with bulb: H
AA--EE 99001122..1188
Head assembly complete with bulb: HR
AA--EE 99001122..8888
Head assembly complete with bulb: Super-8
AA--EE 99001122..9966
Head assembly complete with bulb: Super-8R
AA 00550011
Rubber shroud: all models
BB 99001122
Head with hydrogen absorber: H
BB 99001122..1177
Head with hydrogen absorber: HR
BB 99001122..8800
Head with hydrogen absorber: Super-8
BB 99001122..9955
Head with hydrogen absorber: Super-8R
CC 00004422..5555
H BULB, IKE4 5.0V halogen, standard higher intensity
C 0040.18 HR BULB, 4.7V halogen
CC 00004422..5588
Super-8 BULB, IKE8 10.4V halogen
CC 00004422..2200
Super-8R BULB, 6V halogen
DD 99001122..33
Bulb holder/contact bar: H and Super-8
DD 99001122..3388
Bulb holder/contact bar: HR and Super-8R
EE 00112233
O-ring: all models
FF 99001133
Ni-cad battery module: HR
FF 99001133..88
Ni-cad battery module: Super-8R
00008833..99
Charger, USA 110/220V 6-hour
00008833..9911
Charger, Euro 220V 6-hour
GG 99001122..55xx
Body assembly with toggle: note color H and HR
GG 99001122..88xx
Body assembly with toggle: note color Super-8 and 8R
00991100
Hydrogen absorber
77
IINNTTEERRCCHHAANNGGIINNGG MMOODDEELLSS
RRCCDD HH aanndd HHRR
The HR front head assembly is modified for the rechargeable light which means it is NOT
interchangeable with the 4-cell alkaline version RCD. Only the body assembly is interchangeable
between the H and HR models.
SSUUPPEERR--88 aanndd 88RR
The Super-8R front head assembly is modified for the rechargeable light which means it is NOT
interchangeable with the 8-cell alkaline version Super-8. Only the body assembly is interchangeable
between the Super-8 and 8R models.
MMAAIINNTTEENNAANNCCEE__________________________________________________________________________________________________________________________________
1. We suggest storage of your lite with the locking lever OPEN to allow any potential hydrogen/air
mixture to escape.
2. The inner ledges of the lite body and front assembly are the sealing surfaces. DO NOT allow
these surfaces to become damaged.
3. Keep the o-ring and sealing surfaces clean. DO NOT stretch the o-ring when cleaning. It is not
necessary to lubricate the o-ring. Never use spray lubricant because it will cause cracking of
the plastics.
4. Occasionally clean the metal contacts for a better connection.
5. The front head assembly has been factory sealed; DO NOT disassemble.
CCAAUUTTIIOONN____________________________________________________________________________________________________________________________________________
DO NOT use batteries that have been wet; batteries from a flooded lite should be discarded.
Water could create an internal short circuit at some later date causing a potential explosion. The
normal evolution of all batteries is emitting hydrogen gas. This gas must be absorbed or allowed to
escape to prevent ignition of the entrapped hydrogen/air mixture. We suggest storage of your lite
open to allow any hydrogen/air mixture to escape. A hydrogen absorber has been concealed inside
this lite and should NOT be removed. In case the lite floods, install a new hydrogen absorber in the
spare bulb holder and replace the batteries.
IIKKEELLIITTEE LLIIMMIITTEEDD WWAARRRRAANNTTYY________________________________________________________________________________________________________
All Ikelite products are warranted against any manufacturing defects for a period of one year
from the date of purchase. Defective products should be returned prepaid to Ikelite. Ikelite will,
at its discretion, repair or replace such products, and will return to customer prepaid. All other
claims, of any nature, including but not limited to bulb failure are not covered. Except as men-
tioned above, no other warranty expressed or implied, applies to this Ikelite product.
IIKKEELLIITTEE UUNNDDEERRWWAATTEERR SSYYSSTTEEMMSS
50 West 33rd Street
PO Box 88100
Indianapolis, IN 46208 USA
317-923-4523
wwwwww..iikkeelliittee..ccoomm
Email ikelite@ikelite.com
1200-06-0707