Hyundai HACW18DB - HCCW18DB Air Conditioner User Manual


 
ECR International
Hyundai Ductless Split System7
mark will blink
mark will blink
OPERATION (Continued)
(Example)
Time is AM 10:20. Air-conditioner is not in operation.
How to start the air conditioner at PM 1:30 and stop it at
PM 6:30.
1. Press the
button.
ON-TIMER button or OFF-TIMER button.
2. Press button to adjust ON TIMER to PM 1:30 (Time
can be adjusted at hour intervals by pressing and holding
button. Time can also be adjusted by 10-minute
intervals by pressing button at center interval.
3. Press the TIMER button.
4. Press the button.
5. Press button to adjust OFF TIMER to PM 6:30
Time can be adjusted at hour intervals by pressing
and holding button. Time can also be adjusted
by 10-minute intervals by pressing button at
center interval.
6. Press the TIMER button.
To CANCEL Press the “C” button.
Check if current time is set correctly.
If current time is not correct, timer will not operate at de-
sired time.
HIGH POWER MODE
When the HIGH POWER mode button is pressed, heated or
cooled air comes into the room at a higher fan speed for 15
minutes. The fan speed changes rhythmically between high
and ultra-high.
When the air conditioner(s) continue to run on HIGH
POWER mode in a large room, they may not reach the set
room temperature due to limited cooling capacity. This
may cause water drops to form around the outlet. In such
cases, please switch to MANUAL mode.
To CANCEL:
Press the HIGH POWER but-
ton once more. The operation
is set back to the previous
operation mode.
• If you operate the unit(s) at other than the above condi-
tions, a safety device may be activated and shut off the
power.
• On humid days, frost may form on the surface of air condi-
tioner or condensation may occur.
HIGH POWER MODE
Convenient on a hot day. (During AUTO, HEAT, COOL or DRY
mode)
Press the HIGH POWER button.
OPERATION CONDITION
• Operation Temperature Range:
TIMER MODE (ON, OFF)
• The timer can be set during any mode.
Select the timer setting by pressing:
! CAUTION !
HYUNDAI OPERATING RANGES
Indoor Outdoor
Cool
70-90 70-109 <80%
Dry
59-90 59-109 <80%
Heat
59-81 32-75 <80%
Temperature (°F)
Indoor
Humidity
Mode