Filter
Top Products
7
English
Layer the project fabric with the material
that will be felted together to create the
embellishment. Make sure that the smaller
piece to be felted is on the correct side of
the project (right or wrong side).
The embellishing fabric can be put on either
the right or the wrong side of the project.
Experiment fi rst on scraps to see which look
you like best for your project.
Place the layers to be felted together under
the clear fabric cover with needle guard.
Adjust the height if you need to at this time
so the project can move freely under the
clear fabric cover with needle guard
(see page 3).
Move the fabric in any direction so the
needles can mesh the layers together.
When you have fi nished embellishing the
needle stop position will automatically be up
and out of the project. Because the needles
always stop in the highest up position, your
projects are very easy to place into the felting
area and very easy to remove. You will never
break needles placing or removing your
project.
Start Embellishing