Filter
Top Products
8
Unpacking Instructions
1. Wear gloves and eye protection.
2. Cut straps around carton and remove top.
3. Take hoses out of carton.
4. Remove wood pieces. NOTE: Watch for nails and wood splinters.
5. Slide carton sleeve out of bottom tray and lift over Z2-7
Assembly Instructions
Tools Required:
None
1. Slide the Z2-7 Frame into the Hitch.
2. Line up through holes in the Hitch and Z2-7 Frame and secure with two (2) 3/8” wire lock pins.
Operators Guide
Hitch
Wire Lock
Pin
Frame
1. Attach hitch to unit (see hitch instructions).
2. Mounting the Z2-7