Filter
Top Products
13
45032-01 • 11/05/08 • Hunter Fan Company
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-8. First install candelabra bulbs (60 Watt Maximum) into the sockets.
7-9. If the fandangle is attached to the extra pull chain, remove it now.
7-10. read the fan pull chain through the hole in the metal disc. en,
thread the fan pull chain through the hole in the center of the glass
bowl.
7-11. read the light pull chain through the hole in the center of the
glass bowl. en, read the light pull chain through the hole in
the center of the cover plate.
7-12. read the fan pull chain through the grommet hole in the side of
the cover plate.
7-13. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
7-14. read the light pull chain through the nial and screw the nial
onto the threaded rod end until tight.
7-15. Reattach the fandangle to the extra pull
chain.
Breakaway
Connector
Light Bulb
Sockets
(60 Watt
Maximum)
Metal Rod
Metal Disc
Glass Bowl
Cover Plate
Finial