43001-01 04/27/2007 4 © 2007 Hunter Fan Co.
Figure 2
Using Your Humidier
1. Remove the Hunter® Evaporative Humidier from its packaging.
2. Place the humidier on a hard, at, water resistant surface. Always place the humidier at least
six (6) inches away from walls and sources of heat.
3. Make sure the Power/Speed Control is in the ‘OFF’ position. NOTE: The Power/Speed Control should
always be o before unplugging the humidier, moving the humidier, or relling the water tank.
See Figure 2.
Figure 3
Wick, properly
seated
O
F
F
4. Lift the Main Housing to ensure the Wick is properly seated, resting on the bottom of the base and
not tilted or otherwise out of position. See Figure 3. Place the Main Housing back on the Base.
Power/Speed Control