Hunter Fan 90434 Fan User Manual


 
5
©2010 Hunter Fan Co. 44086-01 20101102
Figure 1.
is appliance is for household use only and may be plugged
into any 120-volt AC electrical outlet (ordinary household cur-
rent). DO NOT use any other type of outlet.
is unit is suitable for grounded receptacle use only.
The power cord has a grounded plug as shown in Figure
1, and must be used with an electrical outlet that can
accommodate the grounding pin. If your electrical outlet
can not accommodate the grounding pin, then you must
purchase and install one of the two types of adapters
shown in Figure
NOTE: The adapters ARE NOT supplied with this fan.
Read, follow, and save the instructions that are included
with the adapter you choose. Do not use an adapter if
your electrical outlet can accommodate the grounding
pin.
LINE CORD SAFETY TIPS
1. NEVER pull or yank on the cord or the appliance.
2. To insert plug, grasp it firmly and guide it into the outlet.
3. To disconnect the appliance, grasp the plug and remove it
from the outlet.
4. Before each use, inspect the line cord for cuts and/or
abrasion marks. If any are found, the appliance should be
serviced and the line cord replaced. Please return it to our
Service Department or to an authorized service representa-
tive.
5. NEVER wrap the cord tightly around the appliance, as this
could place undue stress on the cord where it enters the ap-
pliance and could cause it to fray and break.
6. DO NOT operate appliance if the line cord shows any dam-
age, if the appliance works intermittently or stops working
entirely.
Grounded
Plug
Grounding Pin
Grounded Outlet
Box Cover
WARNING
Figure 2.
Grounded Outlet
Box Cover
Metal
Screw
Adapter
Grounding
Means
GROUNDING