Filter
Top Products
5
Figure 3
This plug has a safety feature. It
contains a safety device (fuse) that
should not be removed. Discard
product if the attachment plug is
damaged. To reduce the risk of re,
electric shock and personal injury,
DO NOT remove, replace, repair or
tamper with the originally supplied
plug. If the Fan does not function
properly, it may be due to the safety
device incorporated in this plug.
If the fuse fails, it is generally
due to a short circuit or circuit
overload. Replace the fuse as
per the instructions below. If the
replacement fuse fails, immediately
unplug the unit and contact our
technical support department for
assistance.
Fuse Replacement:
1. To replace the fuse, rst turn the
unit it off and unplug it from the
wall. Locate the door on top of
the plug. Figure 1.
2. Slide the door on top of the plug
towards the blades. Figure 2.
3. Carefully remove the fuse from
the clips holding it on the top and
bottom. Figure 3.
4. Gently push the fuse back into
the pins that will hold it in place.
Note: If the fuse is not seated properly,
the unit will not function.
5. Slide the Door back over the fuse
box in the plug.
6. Plug the fan back in and
resume use.
FUSED PLUG
Figure 4
Figure 5
Electrical Hazard! Only replace with
a fuse type and rating matching what
was removed from the product.
WARNING