Filter
Top Products
6 42729-01 12/20/2006
ENGLISH
aSSembly ContInued
6. Lower the Base Cover over the
Cast Iron Base. See Figure 1.
7. Twist the Cover Support Cap
clockwise into the Cast Iron
Base until it is tight. See Figure
1.
8. Carefully lean the entire assem
-
bly over so it rests on its side on
the floor.
9. Remove one of the four Cover
Assembly Screws from the bot-
tom of the Cast Iron Base and
loosen the three remaining Cov-
er Assembly Screws. See Figure
2.
Electrical
Cover
Cover Assembly Screw
Telescoping Pole
Base
Wall
Plug
FIGURE 2
Keyslots
10. Connect the plugs coming from
the bottom of the Telescoping
Pole and the insdie of the Elec-
trical Cover.
11.
Place the Electrical Cover
against the bottom of the Cast
Iron Base and align the Keyslots
in the Electrical Cover with the
three loosened Cover Assembly
Screws. Rotate the Electrical
Cover counterclockwise. See
Figure 2.
12. Install the fourth Cover Assem
-
bly Screw. Tighten all four Cover
Assembly Screws to attach the
Electrical Cover to the bottom
of the Cast Iron Base.