Filter
Top Products
42935-01 06/04/2007
11
C7
Insert mounting screws, leaving space between the
screw head and the joist. (Screws are supplied.)
Attach the rails onto the screws.
C8
C9
Tighten screws.
3”
C10
Run the power supply wire through the strain relief, leav-
ing 3” between the end of the wire and the strain relief.
Tighten the strain relief around the wire.
C11
Install the wiring and the strain relief into the wiring
access hole you made earlier.
Connect 4” duct and vent to the outside. Use duct tape to
secure joints. If ducting does not fit securely, an adapter
may need to be purchased.
C12