Filter
Top Products
www.HunterFan.com
1.888.830.1326
Remote Control
ON
Turn Power
Note: The remote must be paired before the
fan will operate.
Within 3 minutes of restoring power to
the fan, press both the Fan Off button and
the High button for at least 4 seconds. Your
fan will turn on low to indicate successful
syncing. If it does not, turn off power to your
fan, wait 1 minute then try again. If using the
transmitter with multiple fans, repeat this
process for each fan.
Fan Off
High
To access the battery compartment, remove the
small Phillips head screw that secures the battery
door to the transmitter assembly. The battery
should be installed with the positive (+) side up.
Replace with a CR2032 battery when necessary.
Phillips
Head
Screw
Battery
Door
16
M0069-01 • 04/30/13 • © Hunter Fan Company
16