Filter
Top Products
www.HunterFan.com
1.888.830.1326
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
Note: Glass shade style and number of lights may vary.
See next page for fan
operation instructions.
Connect the appropriate pull
chain pendant to each of the short
chains coming from the nial
and nial cap. The fan pull chain
controls the speed: from high to
off. The light pull chain controls
the light xture: on and off.
Install a bulb into each of
the sockets. When necessary,
replace with bulbs of the same
type and wattage.
Note: In compliance with US federal energy
regulations, this ceiling fan contains a device
that restricts its light output. Exceeding the
wattage limit marked on the MAX wattage
sticker afxed to the light socket(s) may result
in re hazard or improper operation.
Finial
Finial
Cap
Light
Pull
Chain
Fan
Pull
Chain
Globe
Keeper
Metal
Plate
Globe
Press the globe and globe keeper
ush against the metal plate. Thread
the light pull chain through the hole
in the center of the nial cap and
thread the fan pull chain through the
hole in the side of the cap. Finally,
thread only the light pull chain
through the hole in the nial and
screw the nial onto the threaded rod.
13
M0008-01 • 04/14/14 • © Hunter Fan Company