Filter
Top Products
www.HunterFan.com
1.888.830.1326
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
Install the bulbs into the sockets.
When necessary, replace with
bulbs of same wattage.
Note: Glass shade style and number of lights may vary.
See next page for fan
operation instructions.
Connect a pull chain pendant to
each of the short chains coming
from the switch housing.
To install the shade, rst loosen
the thumb screws. Raise the
shade to the light xture. Tighten
all thumbscrews securely.
Shade
Thumb Screw
Note: In compliance with US federal energy regulations, this ceiling
fan contains a device that restricts its light output. Exceeding the
wattage limit marked on the MAX wattage sticker afxed to the
light socket(s) may result in re hazard or improper operation.
M0001-01 • 08/03/12 • © Hunter Fan Company
15