Hunter Fan 47250A Thermostat User Manual


  Open as PDF
of 7
 
5
®
Setting Day and Time (Continued)
STEP 2:
■ Press again to change from hour setting to
minute setting. The current minute will be
flashing.
■ Press to change the Minute up or down to
the current minute.
STEP 3:
■ Press again to change from minute setting to
day setting. The current day will be flashing.
■ Press to change the Day up or down to the
current day.
STEP 4:
■ Press again to change back to the
normal display.
NOTE: You may press
hold
/return
at any time during Day and Time setting to return to
the normal display.
12 Hr. / 24 Hr. Time Format
Your thermostat is set from the factory in normal 12 (AM / PM) time format. To change to 24 hour
(military) time, press
program
at any time while the Hour, Minute, or Day is flashing to toggle
between the 12 hour and 24 hour formats. The AM / PM indicator will not be displayed in 24 hour
mode. Both the current time and all programs will automatically change to the selected format.
PROGRAMMING
The following time and temperature settings are pre-programmed into the thermostat:
Temperature in C˚ (F˚)
Program Number Time Heat Cool
1 6:00 am 20˚C (68˚F) 26˚C (78˚F)
2 8:00 am 16˚C (60˚F) 29˚C (85˚F)
3 4:00 pm 20˚C (68˚F) 26˚C (78˚F)
4 10:00 pm 16˚C (60˚F) 28˚C (82˚F)
■ All 7 days of the week have the same default programs.
Personal Program Schedule
■ You can revise the factory programs to match your own schedule. Use this Personal Program
Schedule to determine which times and temperature settings match your comfort and energy
saving requirements. Use a pencil so you can revise your records each time you change your
program settings.
Heating
Day Program 1 Program 2 Program 3 Program 4
Monday – Time Time Time Time
Friday Temp Temp Temp Temp
Saturday Time Time Time Time
Temp Temp Temp Temp
Sunday Time Time Time Time
Temp Temp Temp Temp
day/time
M
PM
day/time
M
PM
SA
PM
2
TEMP
day/time
hold
/return
or
SA
PM
2
TEMP
M
F
TH
WT
AM
1
HEAT
program
system
cool
heat
off
Cooling
Day Program 1 Program 2 Program 3 Program 4
Monday – Time Time Time Time
Friday Temp Temp Temp Temp
Saturday Time Time Time Time
Temp Temp Temp Temp
Sunday Time Time Time Time
Temp Temp Temp Temp
Revising Programs
■ Familiarize yourself with manually changing programs, so that you can easily modify the
programs as your comfort needs change. Follow the steps below to change the program times
and temperatures.
NOTE: 1) The program time can be set in 10-minute increments.
2) The program temperature can be set in increments of 1˚C (1˚F).
3) After 15 seconds without a key press, the thermostat will return
to normal display mode.
4) When setting the program time, note the AM / PM indicator.
STEP 1:
■ Slide the System Switch to the HEAT or
COOL position to program the correspond-
ing system.
NOTE: If the System Switch is in the OFF
position, the last position used will be
programmed.
STEP 2:
■ Press to enter program mode. HEAT or COOL
will be displayed on the LCD.
STEP 3:
■ The Program hour and AM or PM indicator
are flashing. Press to change the hour.
STEP 4:
■ Press again to change to the minute posi-
tion. The current minute will be flashing.
■ Press to change the minute.
STEP 5:
■ Press again to change to the program tem-
perature. The current temperature will be
flashing.
■ Press to change the temperature.
STEP 6:
■ Press again to move to the next program number.
■ Repeat Steps 3 through 5 to change the remaining Weekday, Saturday, and
Sunday programs. (There are a total of 12 programs.)
■ After cycling through all 12 programs, press again to return the
display to normal.
■ Press at any time to exit the Program Mode.
M
F
TH
WT
AM
1
HEAT
program
M
F
TH
WT
AM
1
HEAT
program
program
program
hold
/return
 previous next