Hunter Fan 45043-01 Fan User Manual


 
12
45043-01 • 10/19/09 • Hunter Fan Company
Installing the Glass Bowl
7-7. First install B10 candelabra bulbs (40 Watt Maximum)
into the sockets.
7-8. Attach the extra pull chain (included) to the fan pull
chain using the plastic breakaway connector. (You may
nd the plastic breakaway connector on the end of the
extra chain.)
7-9. read the fan pull chain through the hole in the metal
disk. en, thread the fan pull chain through the hole in
the center of the glass bowl.
7-10. read the light pull chain through the hole in the center
of the glass bowl.
7-11. Place the cover plate up against the glass bowl. Align the
holes in the cover plate and glass bowl.
7-12. read the fan pull chain and light pull chain
through the appropriate holes.
7-13. read the light pull chain through
the nial and screw the nial onto the
threaded rod end until tight.
Breakaway
Connector
7 • Completing Your Installation With a Light Fixture (Continued)
Light Bulbs
(B10
Candelabra
Base 40 Watt
Maximum)
Metal Disk
Glass Bowl
Cover Plate
Finial