Filter
Top Products
Solution (cont.)
ERRATIC DISPLAY
IF UNIT CONTINUES TO OPERATE IN THE OFF POSITION
THERMOSTAT PERMANENTLY READS “HI,” “LO,”
OR “ERR-” AFTER PRESSING RESET BUTTON
1. Press the RESET button once with a small pin and hold for two seconds.
The thermostat will need to be re-programmed.
1. Replace unit.
1. Replace unit.
If you experience any other problems, call 1-888-830-1326 from 8 AM to 5 PM Central Time for technical assistance.
Problem (cont.)
B99A p30-40 2/7/03 9:59 AM Page 6