Hunter Fan 44133 Thermostat User Manual


 
44067-01 • 08/03/2012
16
5. Use the or buttons to adjust the start time on the left of the screen
for the period and press
Next
. Again you will use the or buttons to
adjust the end time on the right of the screen for this scheduled period.
Press
Next
again.
6. Set the temperature for your heating cycle as indicated by the ashing
heat to arrow on your screen. Use the
and buttons to change the
temperature and press
Next
. You will be asked to set your cooling cycle,
indicated by the ashing the cool to arrow. Set this temperature with
your
or buttons and press
Next
.
7. The thermostat will start this process again for “Asleep”. Repeat steps
1-5 to schedule the time and set the temperature for your sleep period.
When nished press
Next
to get to “At Home”.
8. When setting “At Home”, you will only be asked to set a temperature.
The thermostat calculates your “At Home” time by what remains
unscheduled from your “Away” and “Asleep” periods. Set your “Heat
To” temperature rst and press
Next
, then Set your “Cool To” temp and
press
Next
to nish Scheduling.
9. If you are scheduling the day periods in order (Weekdays then
Weekends), the screen will ash “Updated!”and take you to the
weekend period.
10. When you have completed all scheduling, press
Done/
Home
to nish.
11. If you skipped a section, or are only programming the weekend, the
Thermostat will show “Updated!” and return you to the Home screen.
Setting Your Schedule