A SERVICE OF

logo

14
42884-01 • 11/05/09 • Hunter Fan Company
Installing the Glass Bowl
7-8. Install the included Pin-Based CFL bulb (26 Watt Maximum) into the
socket.
7-9. read the pull chains through the grommet holes on the sides of the
bracket. en, thread them through the holes in the metal disc.
7-10. Lift the glass bowl up so the threaded nial rod ts
through the hole in the glass bottom.
7-11. Place the cover plate up against the glass bowl. Align the
holes in the cover plate with the grommet hole of the
metal disc.
7-12. Screw the nial onto the threaded rod end until tight.
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Light
Bulb
Chain
Grommet
Hole
readed
Rod
Metal Disc
Glass Bowl
Cover
Plate
Finial
Steps 7-8 – 7-9
Step 7-10
Step 7-11
Step 7-12