A SERVICE OF

logo

13
42882-01 • 11/20/09 • Hunter Fan Company
Installing the Glass Shades
7-6. Place globe over threaded lampholder in cup.
7-7. Install and hand tighten threaded lock washer on lampholder.
7-8. Install 60 Watt max (Type B10) candelabra base bulbs into the sockets.
7 • Completing Your Installation With a Multi Staked Light Fixture (Continued)
Steps 7-6 – 7-8
Lampholder
Globe
readed lock
Washer
Bulb
Note:is product may not be compatible
with certain remote/wall controls or
compact fluorescent bulbs.
Note: In compliance with U.S. Federal energy regulations, this ceiling fan contains a wattage saver that
restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the specications on the
light sockets may result in re hazard or improper operation. If lights do not appear to be operating
properly, see the troubleshooting section