A SERVICE OF

logo

13
Hunter Fan Company 42406-01 • 20080926
Installing the Glass Bowl
1. First install two candelabra base incandescent bulbs.
2. Attach the extra pull chain (included) to the fan pull chain using the
plastic breakaway connector. (You may nd the plastic breakaway
connector on the end of the extra chain.)
3. read the fan pull chain through the hole in the metal disc. en,
thread the fan pull chain through the hole in the center of the glass bowl.
4. read the light pull chain through the hole in the center of the
glass bowl.
5. Place the twig up against the glass bowl.
6. read the light pull chain through the twig and nial and screw the
nial onto the threaded rod end until tight.
Breakaway
Connector
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Rod
Metal Disc
Glass Bowl
Twig
Finial