12
Hunter Fan Company 41922-01 • 02/26/07
13
41922-01 • 02/22/06 Hunter Fan Company
8-5. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only t together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
8-6. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three housing assembly screws.
8-7. To install each shade, rst loosen the three thumbscrews.
8-8. Raise the shade to the light xture. Tighten the thumbscrews
securely.
8-9. Install four candelabra bulbs (60 Watt maximum each).
Note: Glass shade style may vary.
Lower Switch
Housing
Plug
Connector
8 • Installing the Light Kit (Continued)
Housing
Assembly Screw
Plug
Connector
Detail
Steps 8-5 – 8-6
Steps 8-7 – 8-9
umbscrews
Shade
Bulb
