Filter
Top Products
21
OPERATION
1. Set the sE t tE m p E r a t u r E s l i d E r to the desired
temperature.
2. The sy s t E m sw i t c H determines the operating
mode of the thermostat. Select co o l , of f , or
HE a t .
3. The fa n sw i t c H should normally be located in
the au t o position. To run the fan continuously,
slide the fa n sw i t c H to the on position.
Note: In
au t o
, The fan will be turned on along with normal
operation of your system. In a normal gas or oil furnace, the
fan will be turned on by your furnace after its warm-up delay.