Hunter Fan 36204 Humidifier User Manual


 
41793 10/19/2006 © 2006 Hunter Fan Company
8
Boiler
Cover
Boiling
Chamber
Boiler
Base
4. Place the Boiling Chamber into an empty
sink and carefully lift the Boiling Chamber
Cover by pressing the Chamber Cover
Release Tab. This will expose the Heater.
Drain all water and rinse with cool, clean
water. Use a soft brush or sponge to clean
the Boiling Chamber and the Boiling
Chamber Cover.
5. Pour one (1) cup of white vinegar into the
Boiling Chamber and allow it to soak for
20-30 minutes. Rinse several times with
cool, clean water. Wipe the Boiler clean if
necessary.
6. Before reinstalling the Boiling Chamber,
make sure the three metal pins in the
Chamber are clean and completely dry.
Place the Boiling Chamber Cover into the
Boiling Chamber and slide the Chamber
slowly back into place. Make sure the
Chamber fits properly in the Base.
7. To disinfect the Water Tank, create a
solution of one (1) cup of white vinegar
and one (1) gallon of clean water. Fill the
Water Tank with the solution and allow
it to soak for 20 minutes, occasionally
swishing the solution to wet all
interior surfaces. Empty the Water Tank
completely and rinse with clean water
several times. Refill the Water Tank with
cool, clean water and place it back on the
humidifier Base.
8. NEVER
use any metal or hard object,
which could cause scratching of the
humidifier surface, to clean plastic parts.
NEVER
use gasoline, kerosene, glass
cleaner, furniture polish, paint thinner,
or other household solvents to clean any
part of the humidifier.
9. The Water Tank should be drained EACH
DAY, rinsed, and refilled with clean tap
water.
10. To clean the exterior surfaces, use a
solution of water and mild detergent
with a damp cloth. Rinse the surfaces
with clean water and dry with a cloth.
Allow sufficient time to dry before
plugging the electrical cord back into the
outlet.
11. Place the Water Tank back onto the Base
and resume normal use.
Base
Water
Tank