Filter
Top Products
7
©2010 Hunter Fan Company
Humidifier Assistance
Troubleshooting
4
Problem:
Excessive noise
Solution:
1. Check the Water Tank to make sure it is properly seated on
the base.
2. Check the Water Tank to make sure there are no bubbles
when the Water Tank is full and running. If there are bubbles,
turn the unit OFF until the bubbling stops. When the bubbling
has stopped, set the unit to the desired speed.
Problem:
Humidier not working
Solution:
1. Make sure the Power Knob is not set to OFF.
Problem:
Mineral build-up on the Water Tank or Tray
Solution:
1. Refer to the section “Cleaning and Storage” on page 5.
Problem:
Humidity output and water usage decreased
Solution:
1. Check the Power Knob to make sure it is set to the desired
humidity level and speed.
2. Check the Water Tank to make sure there are no bubbles
when the Water Tank is full and running. If there are bubbles,
turn the unit OFF until the bubbling stops. When the bubbling
has stopped, set the unit to the desired speed.
3. Clean any components that have mineral build-up. Refer to
the section “Cleaning and Storage” on page 5.