Filter
Top Products
5©2009 Hunter Fan Co. 43086-01 20090305
OPERATING YOUR AIR PURIFIER
FAN SPEED CONTROL: Sets
the fan speed. Touch once for
Low, again for Medium and once
more for High speed. Press one
last time to turn the unit off.
Pre-filters & CARBON odor
FILTER Reset: Resets the
Pre-Filter and Carbon Filter Life
Counter.
PERMAlife FILTER RESET:
Resets the PERMAlife Filter
Life Counter.
IONIZER: Turns the ionizer on
and off. NOTE: The ON / OFF
key operates the ionizer ONLY.
On/Off Speed
Control
Pre-Filter
Reset
Filter
Reset
Ionizer
On/Off
Pre-Filter/Carbon
Life Counter
PERMAlife
Filter Counter
Keypad
Lock
Fan Speed
Icons
Animated Fan
Operation
Figure 8.
Ionizer
Indicator
Dust and other irritants are pulled into
the air purification system by the fan. The
pre-filters on each side of the unit attracts
larger particles like, pet dander, hair, and
odor causing particles and traps them on
the pre-filter. Smaller particles such as
dust, mold, and pollen are captured by the
PermaLife
®
filter. The pre-filter then captures
any remaining particles and reduces odors
before air is emitted back into the room. Up
to 99.95% of particles as small as .5 microns
can be captured. The ionizer charges any
remaining particles causing them to clump
together and fall to the floor or surface where
they can be removed by cleaning. Clean,
purified air is then released into the room
through the side grill. (Figure 7.)
HOW THE PERMALIFE
®
SYSTEM WORKS
Figure 7.
PermaLife®
Filter
Carbon
Filter
Front
Grill
Ionizer
If the remote is not working properly, rst be
sure that the remote is facing the air purier
when pressing the key. If it still does not work,
check the batteries.
Figure 8.
Pre-Filter