Filter
Top Products
41792-01 8
Operation
Filter Life Counters
The pre-filter and filter are critical to the proper operation of the air purifier. To help you
know when to change the filters, your Hunter Air Purifier has Filter Life Counters that will
monitor the percentage of life your filter has left. Although the exact life of the filters de-
pends on the environment, the table below gives typical usage times of the filters.
Table 2: Typical Usage Times of the Filters
Filter Type Typical Usage
Activated Carbon Pre-Filter 1400 hours
HEPAtech
®
Filter 2800 hours
The display shows the percentage of life left since the counter was reset. NOTE: The per-
centage level drops in 5% increments.
The values of the Pre-Filter and Filter Life Counters are stored in the air purifier’s
memory. The unit may be unplugged and moved or stored without losing the Pre-
Filter and Filter Counter values.
To properly track filter usage, the Pre-Filter and Filter Life Counters should be reset each
time the filters are changed. Refer to Changing the Pre-Filter (pg. 10) or Changing the Filter
(pg. 11) for instructions on how to reset the counters.
Locking/Unlocking the Keypad
Once you enter the desired speed, you may want to lock the keypad to prevent accidental
changing of the speed. When the keypad is locked, all keys will be disabled. If you press a
key, the Keypad Locked Indicator will be displayed on the screen for 1-2 seconds.
To Lock or Unlock the Keypad:
1. To lock the keypad, press and hold the OFF/SPEED and
TURBO keys simultaneously for 2-3 seconds. The Key-
pad Locked Indicator will appear on the display. Refer to
Fig. 9. After releasing the keys, the Keypad Locked Indi-
cator will disappear.
2. To unlock the key pad, press and hold the OFF/SPEED
and TURBO keys simultaneously for 2-3 seconds. The
Keypad Indicator will disappear and the keypad will be
functional.
Fig. 9
41792-01_rev 08.02.05.pmd 8/2/05, 4:24 PM8