Filter
Top Products
41780-01 12
Air Purier Maintenance
FILTER
To change the lter and reset the Filter Life Counter:
1. First, turn o and unplug the air purier.
2. Next, remove the front grill. Place your ngers under the handle on the grill
and pull forward, then up. Refer to Figs. 4 and 5 (pg. 6).
3. Gently pull on the lter to remove it from the unit. While removing the lter,
note the directional arrows printed on the top of the lter. The new lter will
be installed with the same orientation. Refer to Fig. 10. Once removed, the
used lter can be discarded.
4. Look at the directional arrows printed on the side of the lter. Install the lter
with arrows pointing towards the unit. Refer to Fig. 10. Press the lter rmly
into the air purier. To avoid damaging the lter media, you should press on
the frame of the lter only.
5. Place the front grill back onto the unit. First, line up the tab on the bottom
of the grill with the recess on the purier base and then push the top of the
grill forward until it is closed. Refer to Figs. 6 and 7, pg. 7. NOTE: This unit will
not operate unless the grill is in the correct position.
6. Plug in the unit.
7. To reset the counter to zero hours and turn o the indicator, simply press
and hold the FILTER RESET key for three seconds. Then, you must release the
reset key and then press and hold the lter reset key again for three seconds
to turn o the lter indicator.
Fig. 10