Filter
Top Products
41956-01 6
Operation
Initial Operation
This section provides basic instructions on the use of your air purier. After following these
initial directions, please continue reading this booklet to learn how to operate the more
advanced features of your air purier.
Basic Operation of the Air Purier:
1. Take the air purier out of the box and remove the clear plastic protective bag.
Place the unit on a rm level oor.
2. Before turning on the air purier, you need to conrm that the lters are rmly
in place and have not become loose during shipping. To check the lters, open
the front grill by placing your ngers under the handle and pulling the front
grill towards you. The front grill will rest open at about 45º. You can remove the
front grill by placing your ngers under the handle and pulling the front grill
towards you and then up.
Fig. 5
Fig. 6
PULL
FORWARD,
THEN UP
HANDLE
3. Next, check the PermaLife
®
lter by pressing rmly on all four corners of the lter
to ensure that it is fully inserted into the lter opening.
4. The carbon pre-lter is mounted inside the front grill with hook tape. Conrm
that it properly covers the grill vents. You may notice a few black particles coming
o the pre-lter. Those particles are part of the odor-removing activated carbon
and will be collected on the lter during use.
5. Place the front grill back onto the unit. First, line up the tabs on the bottom of
the grill with the openings on the purier base and then push the top of the
grill forward until it is closed. NOTE: This unit will not operate unless the grill is
in the correct position.