Hunter Fan 30140 Air Cleaner User Manual


 
FORM 41304-01 4 ©1999 HUNTER FAN CO.
Using Your Air Purifier
1. Remove your air purifier from the box and take it out of the clear plastic protective bag.
2. Place your HEPAtech™ Air Purification System on a firm, flat surface.
3. Before turning the Air Purifier ‘on’, you need to open the front grill and remove any
protective plastic that may be surrounding the HEPAtech™ filter. Release the front grill
by pulling the grill forward near the bottom of the unit.
4. The filter will be installed in the correct position. Grasp the filter and pull it forward.
When you replace the filter in the unit, the white filter material should be facing outward
(towards you) and the black carbon material should be hidden from view (inside the unit).
5. Replace the front grill. Lay the unit on it’s back. Locate the top tabs in the unit first,
and then push the bottom of the grill into the unit until it is closed. The unit is now
ready for normal operation. NOTE: The unit will not operate unless the door is placed
in the correct position.
6. Plug the unit into a 120V electrical outlet.
Cleaning And Filter Replacement
(Models 30110, 30125, 37125, 30140 and 30165 use Replacement Filter 30925)
1. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and
cleaned in soapy water. Be sure that all parts are completely dry before you reas-
semble them to the Air Purifier.
2. When you remove the front grill to clean it, you should also remove the pre-filter from
the front grill and gently wash it in soapy water. Washing the pre-filter can help extend
the life of your HEPAtech™ Filter.
3. Every few weeks, you should open the front grill and view the condition of the HEPAtech™
Filter. Compare the filter to the color coded chart that is on the inside of the housing. If
the filter matches the dark color on the chart, you should remove the filter and replace it
with a new filter. Be sure to remove any plastic wrapping that may be on the new filter
before you place it into the Air Purifier.
Mounting the Air Purifier to the Wall
Your air purifier has keyhole slots on the back which can be used to mount your air purifier
to the wall. To mount your air purifier to the wall, use plastic dry wall type anchors #14-16
and
1
4" lag screws 1
1
2" long, or equivalent. Optimum performance will be achieved when
the unit is placed on the floor, 6 inches away from the walls.
Replacement Filters:
To obtain a replacement filter for your Air Purifier, call customer service at 901-248-2222
or e-mail us at TechSupport@hunterfanhq.com. Please be prepared to tell the operator the
model number of your Air Purifier and the model number of the filter you need to replace.
Models 30110, 30125, 37125, 30140 and 30165 use Model 30925 Replacement Filters.