Filter
Top Products
©2008 Hunter Fan Co. 43051-01 20080814
2
TABLE OF CONTENTS
SAFETY INSTRUCTIONS
1. This Air Cleaner is designed for use on a flat level surface
and may not work properly otherwise. ALWAYS place the
SOLO
2
on a firm level surface. ALWAYS ensure the
SOLO
2
is at least six (6) inches away from walls or
computers, and 3 ft. from heat sources such as stoves,
radiators, or heaters.
IMPORTANT!
READ ALL INSTRUCTIONS
BEFORE USING THIS AIR CLEANER!
Thank you for purchasing the SOLO
2
Personal Space Air
Cleaner from Hunter Fan Company. You have purchased our
latest development in portable air cleaning which has been
designed to improve the quality of the air that you breathe.
The following innovative features are included in your Hunter
Air Cleaner.
• Touch Sensitive Controls: Your SOLO
2
Air Cleaner
utilizes a touch control interface for operation. The touch
sensitive pads on the front of the unit only need to be
touched with your finger tips to activate. Finger nails,
pens, or pencils will not activate the fields for the touch
control.
• GUI Interface: Convenience and control for your SOLO
2
unit. The user interface on your computer allows you to
not only control your SOLO
2
, but has several programming
options for additional control and convenience.
• Switchable Power Supply: Your SOLO
2
power
adapter meets with all State and Local guidelines for
power consumption. With your power adapter being
“Switchable”, your SOLO
2
can be taken anywhere, even
overseas.
• High Particulate Efficiency: The HEPAtech® filter will
remove microscopic particles from the air that passes
through the filter. The back side of the HEPAtech® filter
includes a carbon filter which will also help illiminate
odors.
INTRODUCTION
2. Before using the SOLO
2
, extend the cord and inspect for
any signs of damage. DO NOT use the product if the cord
has been damaged.
3. ALWAYS UNPLUG the SOLO
2
from your computer and
power source while it is being cleaned.
4. DO NOT immerse the SOLO
2
in water at any time
because permanent damage will occur. To properly clean
your SOLO
2
, follow the instructions in the Maintenance
section of this manual (page 6).
6. This equipment should be inspected frequently and
collected dirt removed from it regularly to prevent
excessive accumulation that could result in flashover or
risk of fire.
Safety Instructions .................................................................2
Introduction ............................................................................2
Software Installation ..............................................................3
Windows Installation
Macintosh Installation
Air Filtration System ..............................................................3
How the HEPAtech® System Works
Solo
2
Components .................................................................4
Computer Operation ..............................................................4
Launching the Control Console
Features and Settings
Adjusting the Solo
2 ................................................................................................................5
Manual Operation ..................................................................6
Touch Sensitive
Areas
On / Off Air Flow Control
Air Cleaner Maintenance .......................................................6
Cleaning
Changing the Filter
Troubleshooting .....................................................................7
Replacement Filters...............................................................8
Technical Support ..................................................................8
Warranty ................................................................................8
Other Home Comfort Products From Hunter .........................9